Tannoy Reveal 502 - 5" Powered Studio Monitors Pair + Ultimate Stands + Cables Bundle

Tannoy Reveal 502 105 Watt 5" Bi-Amped Compact Studio Reference Monitor with Tuned Front-Firing Bass Port

General

• Frequency Response: 49 Hz -43 kHz
• Max SPL: 108 dB

Membrane Sizes

• LF/Mid Range: 5" (130 mm)
• HF: 1" Soft Dome (25 mm)

Bi-amp Output Power, RMS

• Power Output: 75 Watts
• LF/Mid Range: 50 Watts
• HF: 25 Watts
• THD: < 0.7 %

Input Types and Impedances

• Balanced: XLR, 20 kOhm
• Unbalanced: ¼" Jack, 10 kOhm
• AUX Link: Mini Jack, 10 kOhm
• AUX Link Output: Mini Jack

EQ Options

• HF EQ Settings: -1.5 dB HF Cut / Neutral / +1.5 dB HF Boost
• Crossover Frequency: 2.3 kHz
• Low Frequency Alignment: Optimized Front Port

Cabinet Dimensions

• HxWxD, inches: 11.8 x 7.2 x 9.4
• HxWxD, mm: 300 x 184 x 238

Ultimate Support MS-70+ JamStands Series Studio Monitor Stands

• Locking heights: 32.25", 36.25", 40.25", 44.25"
• Platform Dimensions: 9" x 9"
• Effective Base Diameter: 25"
• Weight (individual): 7.45lbs
• Weight Capacity: 50lbs per stand

Manufacturer's Description

Tannoy Reveal 502 105 Watt 5" Bi-Amped Compact Studio Reference Monitor with Tuned Front-Firing Bass Port

REVEAL 502

Custom tweaked by TANNOY’s in-house speaker guru, Dr. Paul Mills, the active cross-over filters of REVEAL 502 have absolutely impeccable timing.

This produces the ultimate sweet spot so that you can move around in your workspace without losing the stereo imaging of your mix – as well as invite people to sit in with you during mixing sessions.

If you’re anything like us, you’re not only working on mixes but also listening to your favorite music! REVEAL 502 gives you the ultimate pathway for both.

With the Aux Link, setting up has never been easier. Use the included mini jack cable to plug into your favorite music player and link your monitors for an instant stereo setup – no need for external interfaces

Features

• Reference monitor ideal for desktop recording or monitoring in personal studios
• 105 Watt custom bi-amped design delivers premium tonal clarity from a compact enclosure
• 5” custom high-efficiency low frequency driver for extended bass response
• 1” soft-dome 'Poke-Resistant' tweeter for detailed high frequency reproduction
• Accurately tuned front-firing bass port allows near-wall placement and ensures optimal low frequency performance
• Ultra-wide sweet spot allows you to move around in your workspace without losing the stereo imaging of your mix
• Rubberized foam base provides acoustic isolation
• Adjustable equalization to match your listening environment
• Balanced XLR input and unbalanced 1/4" TS input for maximum flexibility
• 1/8" stereo input with monitor link facility for connection of mobile devices (cable included)
• TANNOY - 90 years of British audio innovation
• 10-Year Warranty Program*
• Designed and engineered in the U.K.

Ultimate Support MS-70+ JamStands Series Studio Monitor Stands (Pair)

If you're just starting out and have smaller studio monitors that you'd like to set on stands, the JS-MS70+ is the perfect solution for you! The stable low-profile base can easily be positioned into tight spaces, and the new compact base design can fold for easier storage. The JS-MS70+ has four heights from 32.5" to 44.25" and can be securely locked into place with the included locking pin.Information, specifications, colors, and materials subject to change.

Features

• Height-adjustable stand for studio monitors
• Locking pin ensures stable and accurate height positions
• Height adjustable stand for studio monitors
• Low profile base can be easily positioned into tight spaces
• Base folds for easier storage

Pig Hog PHM10 8mm Microphone XLR Cable 10ft

Pig Hog cables are precisely overbuilt to stand up to the most grueling tour conditions imaginable. They feature extra-thick 8mm wire, performance quality connectors, and tension-resistant stress relief. And with Pig Hog's "no question" lifetime guarantee, we've got your back for the life of the cable. Don't settle for those fat-free cables. Grab hold of a Pig Hog!

Features

• High performance microphone cable
• 8mm high quality rubber outer covering
• Heat shrink protected connectors
• Lifetime guarantee

Ultimate Acoustics ISO 100 Isolation Pads

Made from specially formulated, high load bearing foam, which makes them harder and denser than competing products. Foam can feel hard when it is actually stiff. UA Vibro-Pads are less stiff and therefore less susceptible to fatigue when carrying heavy loads. This makes them the best product on the market for effective, long-term isolation of all types of studio monitors.

Each set includes 4 pads with individual levelling adjuster providing a 5° or 10° slope to angle the speaker up, down or flat for optimum listening position.

Each base pad includes it’s own pre-cut levelling wedge adjuster which in standard position will provide a level surface. Alternatively the levelling wedge adjuster can be removed to provide either a 5o or 10o slope angled up or down according to which way round the base pad is resting.

Whichever position Vibro-Pads are utilised we guarantee that your monitors will provide a noticeable sonic improvement and your recordings will sound more accurate and defined once the vibration and resonance has been removed, and because your Studio Monitors are the most critical components to evaluate your recordings their full performance can only be truly revealed once vibration has been removed and total isolation has been achieved.

Manufactured in dark charcoal colour from a specially selected 65Kgs/3m density High Load Bearing (HLB) Hard foam, Vibro-Pads will perform over a long life demonstrating true resilience to compression and will not fatigue during use resulting in years of improved listening quality within your studio or private audio environment.