Rode NTG-2 Shotgun Condenser Video Camera Microphone Mic & Blimp Windshield

Rode NTG2 Multi-Powered Shotgun Microphone

• Acoustic Principle: Line Gradient
• Active Electronics: JFET impedance convertor with balanced transformer output
• Capsule: 0.50"
• Polar Pattern: Supercardioid
• Address Type: End
• Frequency Range: 20Hz - 20kHz (selected HPF @ 0)
• Output Impedance: 250Ω
• Maximum SPL: 131dB SPL (@ 1kHz, 1% THD into 1KΩ load)
• Maximum Output Level: 6.9dBu (@ 1kHz, 1% THD into 1KΩ load)
• Sensitivity: -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
• Equivalent Noise Level (A-weighted): 18dB-A
• Power Options: AA battery powered; +48v phantom power required from mixer or interface
• Weight: 161.00gm
• Dimensions: 280.00mmH x 22.00mmW x 22.00mmD
• Dimensions: 280.00mmH x 22.00mmW x 22.00mmD
• Output: 3-pin XLR output
• Warranty: 1 year with free extension to 10 years

Rode All New Redesigned Blimp 2 Shotgun Microphone Wind Shield and Shock Mount System

Specs:

• Weight: 550g (1.2125 lbs)
• Dimensions (H x W x D): 285mm x 490mm x 125mm

 Manufacturer's Description

The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.

In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.

The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.

The RØDE NTG2 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.

Features:

• Broadcast sound quality
• Low noise circuitry
• Condenser transducer
• Rugged metal construction
• Two step High Pass Filter (Flat/80Hz)
• P48 phantom power or AA battery option
• Low handling noise
• Low weight - 161g (5.17 oz.)
• Includes mic clip, wind sheild and zip case
• Ideal for professional applications within the film, video, television and production industries

Rode All New Redesigned Blimp 2 Shotgun Microphone Wind Shield and Shock Mount System

The original RØDE Blimp as launched in 2008, and quickly became the best-selling system of its kind. Upon release it was awarded both the European Red Dot and Australian International Design Award – two of the world’s most respected product design awards – recognising the Blimp as a product of sophisticated design, solving a number of challenges faced by location sound recordists.

This new version of the Blimp sees a range of functional improvements that make it unquestionably the best windshield and shock mounting accessory available.

Building on the system’s existing high level of performance, the Blimp’s shock mounting is now performed by the robust and user-friendly Lyre system, licensed from Rycote. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap. Whereas the previous Blimp required users to reconfigure the elastic suspension for heavier microphones, the Lyre is able to accommodate a range of microphones without any modification, making adjustments in the field even easier.

The Blimp’s handle has also been completely redesigned, reducing the product weight significantly, while increasing the ergonomics for handheld use. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box to a highly-flexible thin cable inside the Blimp, to minimise the transference of vibration to the microphone.

In addition to RØDE’s range of shotgun microphones – the NTG1, NTG2 and NTG3, the Blimp also accommodates most shotgun microphones up to 325mm (12 ¾”) in length. It attaches to any standard boompole via 3/8" thread attachment at the base. RØDE also offers the Universal Blimp Mount as an option to remove the handle when the Blimp is being used primarily on a boompole to reduce weight.

An artificial fur windshield (affectionately known as a Dead Wombat) is included for outdoor use to minimise wind noise. Additionally a compact folding brush is supplied to maintain the Dead Wombat’s artificial fur.

Features:

• Greatly reduces handling and wind noise
• Accommodates most shotgun microphones 325mm in length and 19-22mm diameter
• Rycote Lyre suspension system onboard with internal spacing guide
• Lightweight skeleton handle with 3/8” thread mount
• Mogami cable with Neutrik and Switchcraft XLR connectors
• Dead Wombat windshield included