SKU
QSC-AC-S4T
QSC AC-S4T AcousticCoverage Series Surface Mount Speaker
$136.00
- Effective frequency range1: 70 Hz–20 kHz
- Rated noise power / voltage2: 16 watts / 11.3 volts rms
- Broad-band sensitivity3: 85 dB SPL
- Coverage angle (-6 dB): 130° conical (500 Hz–5 kHz)
- Directivity factor (Q): 6
- Directivity Index: 8 dB
- Maximum continuous SPL4: 97 dB
- Maximum peak SPL4: 103 dB
- Rated impedance: 8 ohms
- Recommended amplifier power: 32 watts into 8 ohms
- Transformer taps
- 70V: 16, 8, 4, 2, 1 watts
- 100V: 16, 8, 4, 2 watts
- 8 ohm bypass
- LF transducer: 114 mm (4.5-inch) Polypropylene woofer with 25 mm (1-inch) voice coil
- HF transducer: 25 mm (1-inch) Aluminium dome tweeter with 25 mm (1-inch) voice coil
- Input connector type: Euroblock connector with parallel output
- Enclosure material: UV treated, high impact ABS polymer
- Grille material: Powder coated steel
- Yoke material: Powder coated steel with brass inserts
- Enclosure Details
- Ingress protection, Operating environment, Operating Temperature Range: IP-44 Designed for indoor use -20 to 50° C (-4 to 122° F)
- Product Dimensions (HWD) inches: 9.1 x 6.3 x 5.9
- Product Dimensions (HWD) mm: 230 × 160 × 150
- Net Weight: 5.3 lb / 2.4 kg
- Included accessories: Yoke mount system, euroblock connector
1 Free-field, -10 dB from on-axis sensitivity
2 IEC60268-1 noise signal for 2 hours
3 On-Axis, free-field sensitivity, 2.83V, 1 m
4 Calculated from rated noise voltage and sensitivity
Manufacturer's Description
Features
- High quality transducers provide exceptional clarity through the critical voice range.
- Improved musicality often not seen in typical BGM class products.
- Ported baffle for increased low frequency extension down to 70 Hz.
- Low saturation 70/100V transformers with 8 ohm bypass.
- 4-pole Euroblock connector eases system wiring.
- Advanced voicing via QSC Intrinsic Correction™, applied using Q-SYS processing or CXD amplifier platforms.
- Available in white (RAL 9010).
- Complete EASE, CAD & BIM information available online.