Audio Technica AT4050 Multi-Pattern Condenser Microphone

• Element: exterally-polarized (DC bias) condenser

• Polar pattern: cardioid, omnidirectional, figure-of-eight

• Frequency response: 80-18,000Hz

• Low frequency roll-off: 80Hz, 12dB/octave

• Open circuit sensitivity: -36dB (15.8 mV) re 1V at 1 Pa

• Impedance: 100 ohms

• Maximum input sound level: 149dB SPL, 1kHz at 1% T.H.D., 159dB SPL, with 10dB pad (nominal)

• Dynamic range (typical): 132 333dB, 1kHz at Max SPL

• Signal-to-noise ratio: 77dB, 1kHz at 1Pa

• Phantom power requirements: 48V DC, 4.2 ma typical

• Switches: polar selection; flat, roll-off; 10dB pad (nominal)

• Weight: 18.0 oz. (510 g)

• Dimensions: 7.40" (188.0 mm) long, 2.10" (53.4 mm) maximum body diameter

• Output connectors: Integral 3-pin XLRM-type

• Accessories furnished: AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case

• Audio-Technica case style: R1

Manufacturer's Description

Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050 exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity.

Features

• Dual large gold diaphram capsule

• 3 switchable polar patterns: omni, cardioid, figure-8

• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients

• State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards

• Switchable 80Hz hi-pass filter and 10dB pad

• Custom shock mount provides superior isolation