Audio Technica AT2050 Multi-pattern Condenser Microphone
-
Element: Externally-polarized (DC bias) condenser Externally-polarized (DC bias) condenser
-
Polar Pattern: Cardioid, Omnidirectional. Figure-of-Eight
-
Frequency Response: 20-20,000 Hz
-
Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
-
Open Circuit Sensitivity: —42 dB (7.9 mV) re 1V at 1 Pa
-
Impedance: 120 Ohms
-
Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
-
Noise: 17 dB SPL
-
Dynamic Range (Typical): 132 dB, 1 KHz At Max SPL
-
Signal-To-Noise Ratio: 77 dB, 1 KHz At 1 Pa
-
Phantom Power Requirements: 11-52v DC, 4.7 Ma Typical
-
Switches: Flat, Roll-Off; 10 dB Pad (Nominal)
-
Weight: 412 G (14.5 Oz)
-
Dimensions: 170.0 mm (6.69") Long, 52.0 mm (2.05") Maximum Body Diameter
-
Output Connector: Integral 3-Pin XLRM-Type
-
Accessories Furnished: AT8458 Shock Mount For 5/8"-27 Threaded Stands; 5/8"-27 To 3/8"-16 Threaded Adapter; Soft Protective Pouch
-
Audio-Technica Case Style: R5
Manufacturer's Description
Audio Technica AT2050 Multi-pattern Condenser Microphone
Features
-
Three switchable polar patterns: omni, cardioid, figure-of-eight
-
Switchable 80 Hz high-pass filter and 10 dB pad
-
Large diaphragm for smooth, natural sound and low noise
-
State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
-
Includes shock mount & protective pouch