Audio Technica AT2020 Streaming / Podcasting Pack Microphone Headphones Bundle AT2020PK
- ELEMENT: Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN: Cardioid
- FREQUENCY RESPONSE: 20-20,000 Hz
- OPEN CIRCUIT SENSITIVITY: -37 dB (14.1 mV) re 1V at 1 Pa
- IMPEDANCE: 100 ohms
- MAXIMUM INPUT SOUND LEVEL: 144 dB SPL, 1 kHz at 1% T.H.D.
- NOISE: 20 dB SPL
- DYNAMIC RANGE (typical): 124 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO: 74 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS: 48V DC, 2 mA typical
- WEIGHT: 345 g (12.1 oz)
- DIMENSIONS: 162.0 mm (6.38") long, 52.0 mm (2.05") maximum body diameter
- OUTPUT CONNECTOR: Integral 3-pin XLRM-type
- ACCESSORIES FURNISHED: Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- AUDIO-TECHNICA CASE STYLE: R7
ATH-M20x Headphones Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 – 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessories Included: 6.3 mm (1/4") snap-on adapter
Manufacturer's Description
The AT2020PK vocal microphone pack is designed for streamers, podcasters, and other content creators who need a versatile, easy-to-install, easy-to-adjust boom microphone setup. The pack includes an AT2020 cardioid condenser microphone, a pair of ATH-M20x professional monitor headphones and a studio boom arm threaded with a XLR cable.
The adjustable studio boom arm clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick. The boom is equipped with a standard 5/8"-27 thread for easy attachment of the included pivoting microphone stand mount, and the XLR cable is threaded internally for a clean appearance and unhindered operation. Offering full 360° rotation and adjustable, spring-stabilized joints, the boom arm repositions quickly for optimal mic placement.
The rugged AT2020 side-address studio condenser microphone features a low-mass diaphragm that is custom-engineered for extended frequency response and superior transient response for excellent vocal reproduction. The microphone offers a wide dynamic range and handles high SPLs with ease. Its analog XLR output connects easily to a digital converter or mixer.
Rounding out the pack are the ATH-M20x pro headphones, part of Audio-Technica’s critically acclaimed M-Series line. With 40 mm drivers tuned for enhanced low-frequency performance and comfortable, sound-isolating earpads, the M20x headphones are perfect for long monitoring sessions.
Features
AT2020 Cardioid Condenser Microphone
- The price/performance standard in side-address studio condenser microphone technology
- Ideal for vocal pickup
- High SPL handling and wide dynamic range provide unmatched versatility
- Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Pivoting, threaded stand mount attaches securely for easy and precise placement of the microphone
ATH-M20x Professional Monitor Headphones
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
Adjustable Studio Boom Arm
- Full 360° rotation
- Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone
- Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick
- Included XLR cable (XLRF to XLRM) extends 3 m (10') from the base of the boom arm
- Internal cable management for clean desk appearance
- Standard 5/8"-27 thread for easy attachment of the included pivoting stand mount