Audient ID4 USB Interface with Audio Technica M20X Headphones, Samson C01 Microphone, and 10' Cable
This product has been discontinued.
Audient ID4 High Performance USB Audio Interface
MICROPHONE PREAMPLIFIER:
(measurement includes ADC signal path)
MIC GAIN: | 0 to 66 dB (inc. +10 dB software boost) |
LINE GAIN: | -10 to 56 dB (-10dB hardwired line pad) |
PHANTOM POWER: | 48V ±4V @ 10mA/Channel (12VDC only)* |
MIC EIN: | <-126.0 dBu |
CMRR: | >75 dB @ 1kHz |
MAXIMUM INPUT LEVEL: | +12 dBu (0 dBFS digital Maximum) |
INPUT IMPEDANCE (Mic): | 2.8 kΩ Balanced |
INPUT IMPEDANCE (Line): | >8kΩ Balanced |
FREQUENCY RESPONSE: | ±0.1 dB 20Hz to 22kHz @ min. gain ±1.0 dB 20Hz to 22kHz @ max. gain |
CROSSTALK: | <-91 dBu |
THD+N @ 0dBu (1kHz): | 0.0015% (-96.5dBu) |
SNR: | 96 dB un-weighted, 99 dB A-weighted |
XLR Combi Female | Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield) |
1/4" TRS Jack | Tip (Hot), Ring (Cold) & Sleeve (Shield) |
D.I (Channel 1):
D.I GAIN: | -5 to 45 dB (inc. +10 dB software boost) |
MAXIMUM INPUT LEVEL: | +8 dBu (0.6% THD typical) |
INPUT IMPEDANCE: | >500kΩ Unbalanced |
FREQUENCY RESPONSE: | ±0.1 dB 20Hz to 22kHz |
THD+N @ 0dBu (1kHz): | <0.1% all musical 2nd and 3rd harmonics
Typically 0.05% at 0dBu |
SNR: | 87 dB un-weighted, 90dB A-weighted |
1/4” JACK: | TIP (Hot) & SLEEVE (Shield) |
ANALOGUE TO DIGITAL CONVERTER (ADC 1 & 2):
(measured sans microphone preamplifier under AES-17)
MAXIMUM INPUT LEVEL: | +12 dBu (0 dBFS digital maximum) |
DIGITAL REFERENCE LEVEL: | +12 dBu = 0 dBFS |
FREQUENCY RESPONSE: | ±0.1 dB 10Hz to Fs/2 (flat to nyquist) |
CROSSTALK: | -100 dBu @ 1kHz & 10kHz |
THD+N @ -1dBFS (1kHz): | <0.001% (-100 dB) |
THD+N @ -6dBFS (1kHz): | <0.0011% (-99.1 dB) |
DYNAMIC RANGE: | 112 dB un-weighted 114 dB A-weighted |
DIGITAL TO ANALOGUE CONVERTER (DAC 1&2):
(measured under AES-17 at line outputs 1&2)
MAXIMUM OUTPUT LEVEL: | +12 dBu (0 dBFS digital maximum) |
DIGITAL REFERENCE LEVEL: | +12 dBu = 0 dBFS |
OUTPUT IMPEDANCE | <100Ω |
FREQUENCY RESPONSE: | ±0.1 dB 10Hz to Fs/2 (flat to nyquist) |
CROSSTALK: | <-104 dBu @ 1kHz & 10kHz |
THD+N @ -1dBFS (1kHz): | <0.0015% (-96.5 dB) |
DYNAMIC RANGE: | 112 dB un-weighted 115 dB A-weighted |
1/4" TRS Jack | Tip (Hot), Ring (Cold) & Sleeve (Shield) |
DUAL HEADPHONE OUTPUT:
MAXIMUM OUTPUT LEVEL: | +12 dBu (0dBFS digital maximum) |
DIGITAL REFERENCE LEVEL: | +12 dBu = 0 dBFS |
VOLTAGE GAIN: | +6 dB (optimised for loudness) |
OUTPUT IMPEDANCE: | <30 Ω Unbalanced |
FREQUENCY RESPONSE: | ±1.0 dB 10Hz to Fs/2 (load dependant) |
CROSSTALK: | -98 dBu @ 1kHz & 10kHz |
THD+N @ -1dBFS (1kHz): | <0.0012% (-98.4 dB) |
DYNAMIC RANGE: | 106 dB un-weighted 108 dB A-weighted |
MAX LEVEL INTO 30ohms: | +3 dBu, 0.008% THD+N, Power: 80mW |
MAX LEVEL INTO 60ohms: | +6 dBu, 0.005% THD+N, Power: 80mW |
MAX LEVEL INTO 600ohms: | +12 dBu, 0.0025% THD+N, Power: 31mW |
1/4” TRS JACK: | TIP (Left), RING (Right) & SLEEVE (Shield) |
1/8” MINI JACK: | TIP (Left), RING (Right) & SLEEVE (Shield) |
USB 2.0 HIGH SPEED:
BUS POWER: | 500mA @5V System Limit 420mA @5V Maximum (No 48V) |
No. of INPUT CHANNELS: | 2 (2 Analogue) |
No. of OUTPUT CHANNELS: | 2 (2 Analogue) |
DSP MIXER LATENCY: | ROUND TRIP (in-to-out)
44.1kHz 1.583ms |
COMPATIBILITY:
iD4 supports the following operating systems:
- macOS 10.7.5 and later
- Windows 7 and later
- iOS 6 and later
* To use iD4 with an iOS device a camera adapter kit and a powered USB 2.0 hub is required.
POWER SUPPLY:
USB2.0 Powered (2.5 Watts Maximum)*
* iD4 features our class leading converters and class-A mic pre. We've optimised all circuitry so that we can supply true 48v phantom power to a single Audient mic pre without compromise. Your microphones will thank you when they get enough voltage.
Audio-Technica ATH-M20x Professional Monitoring Headphones
Specs:
-
Type: Closed-back dynamic
-
Driver Diameter: 40mm
-
Magnet: Neodynium
-
Voice Coil: CCAW (Copper-clad aluminum wire)
-
Frequency Response: 15 Hz - 20 kHz
-
Maximum Input Power: 700 mW @ 1 kHz
-
Sensitivity: 96 dB
-
Impedance: 47 Ohms
-
Weight: 190 g (6.7 oz.), without cable and connector
-
Cable: 3.0 m (9.8') straight, left side exit
-
Accessories Included: 6.3 mm (1/4") snap-on adapter
Manufacturer's Description
Audient ID4 High Performance USB Audio Interface
iD4 delivers the audio performance of a large format console in a portable desktop package. Providing one renowned Audient console mic pre, class-leading converter technology, two headphone inputs, console style monitor control, JFET D.I and our virtual scroll wheel technology 'ScrollControl', iD4 is a professional but affordable solution for your home studio or for when you’re on the road.
WORLD CLASS MIC PRES
The professional sound you deserve
We are the only company that use the same Class-A mic pre design throughout our entire product range, whether you’re in the studio with an Audient console or on the road with iD4, you’re always guaranteed the same world class Audient sound.
PRISTINE CONVERTER TECHNOLOGY
Brilliance on the inside enables brilliance on the outside
iD4 provides you with high performance AD-DA converters. Quality in the analogue stages of design comes from years of experience as analogue console designers, and when coupled with outstanding converter technology it enables you to hear audio as it’s supposed to sound. The importance of converters should never be underestimated. Experience audio the Audient way.
THE REVOLUTIONARY ‘SCROLLCONTROL’
Simply scroll to control
With a touch of a button iD4’s volume encoder becomes a virtual scroll wheel, enabling you to adjust DAW hosts, plug-in parameters and even scroll through your iTunes library - just like you’re adjusting a piece of hardware. Wherever your mouse pointer hovers, the iD knob can scroll to control! And when your not using ScrollControl, pressing iD4’s volume encoder activates DIM, enabling you to quickly reduce the playback volume.
PLUG AND PLAY
Plug in and be inspired
iD4 has a harmonically rich JFET D.I input. Designed to replicate the input stage of a classic valve amplifier, you can plug your guitar, bass, keyboard or drum machine straight in and start recording instantly. Get professional quality recordings from the start and take your track to the next level.
MONITOR PAN
Headphone mixes with Clarity
Recording an acoustic guitar and vocal? iD4’s Monitor Pan feature enables you to pan both the mic pre input and D.I input from left to right, making it easy for you to create a balanced headphone mix that suits you. Quickly plug in, set up a headphone mix and starting tracking instantly, perfect for singer songwriters & producers on the go!
MONITOR MIX
Record with confidence
iD4’s Monitor Mix feature lets you monitor a blend of both iD4’s inputs and your DAW playback, providing near zero latency monitoring while recording. Designed with creativity in mind, Monitor Mix allows you to quickly blend in your DAW playback and start recording along to your multitrack instantly, enabling you to focus on the music and lay down your track effortlessly.
DUAL HEADPHONE OUTPUTS
Write, collaborate and create
Featuring a dual headphone output, iD4 enables you to collaborate with your friends and other artists. Whether you’re recording a guitar and a vocal, or just listening to music together, iD4 lets you plug in two sets of headphones, making it the perfect tool for jamming with your friends and capturing creativity as it happens. The dual headphone output also has both a jack and mini jack output, so no more need to carry around a pesky headphone adaptor!
BUILT TO LAST
Quality deserves protection
iD4 has been designed to last, from its all-metal construction, hand finished aluminium knobs and high grade component selection, iD4 will stand up to countless late nights in the studio and days on the road.
Features
- 1 x Class-A Audient Console Mic Preamplifier
- 1 x Discrete JFET Instrument Input
- High Performance Converters
- iD ScrollControl Mode
- Zero Latency Monitoring with Monitor Mix & Pan
- Main Speaker Output
- Independent Class-AB Headphone Output (dual inputs)
- Monitor Control Functionality
- USB2.0 Bus Powered
- 24bit/96khz
- All-Metal Enclosure
- Windows, macOS and iOS compatible
Audio-Technica ATH-M20x Professional Monitoring Headphones
The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
More About the M-Series Headphones
Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
Features:
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
- Designed for studio tracking and mixing
Samson C01 Condenser Microphone
Samson's C01 has all the performance features that you demand from a large diaphragm condenser microphone. It's the perfect solution for recording vocals, acoustic instruments and for use as and overhead drum mic.
Featuring a large, dual-layer 19mm diaphragm with a cardioid pickup pattern, the C01 produces a smooth flat frequency response. Its two ultra-thin sensor membranes pick up far more detailed sounds than any dynamic coil. The result is a mic that captures accurate, detailed and smooth audio with warm bass tones and extended top end. You'll hear the strings and wood of your guitar, the breath and resonance of a singer, or the brassy shimmer of a ride cymbal with crystal clear clarity.
The C01's design includes a heavy gauge mesh grill, gold-plated XLR connecter and an LED for monitoring its 48V of phantom power. It also comes with a swivel mount that can be attached to any standard mic stand. In addition, an optional SP01 spider shock mount is available for increased mic and sound stability.
Samson's C01 is one of the best values available from a professional recording microphone.
Pig Hog PHM10 8mm Microphone XLR Cable 10ft
Pig Hog cables are precisely overbuilt to stand up to the most grueling tour conditions imaginable. They feature extra-thick 8mm wire, performance quality connectors, and tension-resistant stress relief. And with Pig Hog's "no question" lifetime guarantee, we've got your back for the life of the cable. Don't settle for those fat-free cables. Grab hold of a Pig Hog!
Features
-
High performance microphone cable
-
8mm high quality rubber outer covering
-
Heat shrink protected connectors
-
Lifetime guarantee