Mackie HR624mk2 6.7" Active Studio Monitor Pair with IsoAcoustics ISO-155 Isolation Stands

Mackie HR624mk2 6.7" 2-Way 140W Active Studio Monitor

Input Type:

• Balanced Differential 
• (XLR and 1/4" TRS)
• Unbalanced (RCA)
• Input Impedance:
• 20 k! Balanced
• 10 k! Unbalanced
• Input Protection: RFI and Level Protected
• Maximum Input Level: +20 dBu
• Low Frequency Filter: 80 Hz, 2nd Order, Butterworth
• HF Equalization: Shelving ±2 dB @ 10 kHz

Acoustic Space:

• A position:   –4 dB @ 50 Hz, shelving
• B position: –2 dB @ 50 Hz, shelving
• C position:  Flat

• Compressor: Independent high and low frequency overload detection
• Enclosure Alignment: 6th Order
• Over Excursion Prevention: 2nd Order High-Pass Filter
• Low Line Voltage Shut Down: 60% of Nominal Line
• Thermal Protection: Amplifier Shut-Down, Auto Reset
• Muting: 5 seconds at  turn-on
• Signal Sense Threshold: –74 dBu (0.155 mV)

Driver Protection:

• Independent LF and HF Detection 
• Overall Compression

Physical Properties:

• Height: 13.1 in/33.3 cm
• Width: 8.6 in/21.9 cm
• Depth Enclosure: 10.3 in/26.2 cm
• Depth Overall: 12.6 in/31.9 cm
• Internal Volume: 0.29 cubic feet (8.2 liters)
• Weight: 23.4 lb/10.6 kg

 Manufacturer's Description

Mackie HR624mk2 6.7" 2-Way 140W Active Studio Monitor

HRmk2 SERIOUS MIX TRANSLATION

Back in the ’90s, our HR Series studio reference monitors revolutionized studio monitoring. With their incredible sound quality and affordability, they earned a wide and loyal following, fast becoming the industry standard. Today’s studio demands a monitor that can reproduce sound as precisely as it is recorded. The same innovation that launched our pioneering HR Series has led to the birth of just such a monitor as well as a new studio standard. Meet the HRmk2.

CURVES

Zero-Edge Baffle™

The one-piece cast aluminum Zero Edge Baffle™ features precisely engineered curvature that minimizes diffraction for a crystal clear image of your mix, and effectively controls sound waves so you get detailed lows, full, articulate mids, and shimmering highs.

LOWS

Passive Radiator

The passive radiator replaces the port found on most speaker systems. One primary advantage of a passive radiator is that it can reproduce low frequencies with lower distortion and at a higher sound pressure level (SPL) than a simple port or duct.

POWER

Precision Amplification

The HRmk2 Series monitors contain separate onboard amplifiers for each driver, plus onboard active crossovers and time-correction circuitry, which helps ensure highs and lows reach your ears at the same time. The HRmk2s also have protection circuitry built in to protect from damaging input levels. 

WOOD

Cabinet Design

The HRmk2 monitors feature a wood cabinet, with custom internal bracing to increase its strength and rigidity in desired locations. To absorb internal reflections and dampen standing waves inside the cabinet, an open-cell adiabatic foam material is placed strategically inside the box.

CRAFTSMANSHIP

Unparalleled Quality

We go to elaborate lengths to ensure each HRmk2 sounds as good as our experts intended. Each one we manufacture is subject to rigorous testing and pre-screening during the production process, then calibrated and tuned with an environmentally controlled test chamber before final packaging.

INDICATE

Power and Overload LED

Our LED power indicator is a tasty shade of white and red for when things get pushed a little too hard. We took care to make sure the brightness is just right, too. The light shines bright enough so you can see it just fine in a well-lit room, and in a dark environment, it won’t distract or blind you.

CHOICE

Rotatable Logo

Due to their ultra-wide sweet zone, our HRmk2 monitors can be oriented vertically or horizontally, so we made our Mackie logo rotate-able. No matter which way you orient your HRmk2s, they’re always right-side up!

Features:

IsoAcoustics ISO-155 Acoustic Isolation Studio Monitor Stands Pair, Medium

IsoAcoustics Inc. is pleased to introduce the next evolution of our specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker’s energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you’re a pro mixing in the studio – a musician creating in a home project environment – or an audiophile who appreciates every nuance of music and sound – you’ll hear and appreciate the difference with the ISO Series speaker stands. It’s simply the best investment you can make for superior audio.

ISO-155

Designed for medium size speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

• 6.1”x7.5”/15.5x19cm Short: 2.9”/9.5cm Tall: 8.75”/22.5cm 40 lbs/18kg