See. Hear. Experience.

EarthQuaker Devices Avalanche Run V2 Delay and Reverb Guitar Effects Pedal
EarthQuaker Devices Avalanche Run V2 Delay and Reverb Guitar Effects Pedal EarthQuaker Devices Avalanche Run V2 Delay and Reverb Guitar Effects Pedal EarthQuaker Devices Avalanche Run V2 Delay and Reverb Guitar Effects Pedal EarthQuaker Devices Avalanche Run V2 Delay and Reverb Guitar Effects Pedal EarthQuaker Devices Avalanche Run V2 Delay and Reverb Guitar Effects Pedal

EarthQuaker Devices Avalanche Run V2 Delay and Reverb Guitar Effects Pedal

...

Condition: New

SKU: EQD-AVALANCHERUN-V2

In stock

Details

  • 24-bit 96kHz A/D & D/A converters
  • 115dB Typical signal to noise
  • Input impedance: 1M Ohm
  • Output impedance: 100 Ohm
  • All analog dry signal path
  • All digital wet signal path with 20hz-20kHz Frequency response
  • Selectable relay-based true bypass or buffered analog tails modes
  • PCB’s populated by a combination of artificial and human intelligence in the Akron, Ohio of America.
  • Each and every Avalanche Run is completely assembled, wired and tested by total human beans in the tiny tundra town of Akron, Ohio.

Manufacturer's Description

The Avalanche Run is a dreamy sonic discovery device with up to 2 seconds of delay time and a lush stereo reverb. It features complete control over delay time, repeats, mix and voice (with the tone control), as well as control over the reverb length and mix. It can run in one of 3 different modes: Normal, Reverse and Swell. In “Normal” mode, the Avalanche Run functions as a straightforward delay and reverb. In “Reverse” mode, the delay line is in reverse and the reverb remains in normal mode. In “Swell” mode, the Avalanche Run reacts to your picking dynamics and adds a volume swell to the entire signal path much like manually raising and lowering the volume of your guitar.

The Avalanche Run features an expression jack that can be assigned to one of six different controls using the “EXP” selector switch. It also features Tap Tempo with six different ratios accessed via the “Ratio” selector switch. The Avalanche Run can also be run in “True Bypass” mode or “Buffered Bypass” mode for trails and features 5 different tail lengths including “Infinite” for lo-fi and continuously degrading pseudo-looping.

The Activate switch features our Flexi-Switch™ Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

  • For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.
  • For momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.

The Tap switch also has a few other cool secondary functions. While in Normal and Swell mode, you can send the Avalanche Run into self-oscillation by holding down the “Tap” foot switch. In Reverse, mode holding down the Tap switch will flip the delay back into Normal mode and return to Reverse mode once released.

Controls

TOP ROW

Time- This controls the delay time and goes from 0ms to just under 2000ms.

Repeats- Controls the regeneration of the delay, from zero repeats to near infinite.

Tone- Controls the tone for the delay line only. Roll off highs to the left, roll off lows to the right and get a flat response in the middle.

Mix- The is the volume control for the delay line. This blends in the wet with dry until 1 o’clock, 1 o’clock to 3 o’clock boosts the wet signal over the dry and 3 o’clock up brings down dry until it is fully wet when all the way up.

BOTTOM ROW

Expression Jack Assign Switch- Use this switch to map the expression jack to one of the assigned controls.

  • Decay- Controls the reverb decay length
  • R Mix- Controls the reverb mix
  • Time- This takes over for the delay time control and is DRASTICALLY different than the interface control. Using the expression pedal to control the time will give you all kinds of wild effects that can not be achieved by turning the knob.
  • Repeats- Controls the delay repeats
  • D Mix- Controls the delay mix
  • Toggle- This takes over for the toggle switch and will cross fade from forward delay in heel down position to reverse delay in toe down position.

Decay- Controls the decay length of the reverb, short decay counterclockwise, long cavernous decay clockwise.

Mix- This is the volume control for the reverb. Blends in the wet with dry until 1 O’clock, 1 O’clock to 3 O’clock boosts the wet signal over the dry and 3 O’clock up brings down dry until it is fully wet when all the way up.

Ratio Selector Switch- Selects delay subdivisions when time is set by the “Tap” switch.

  • 1/1- Quarter Note
  • 3/4- Dotted 8th
  • 2/3- Quarter Note Triplet
  • 1/2- 8th Note
  • 1/3- 8th Note Triplet
  • 1/4- 16th Note

TOGGLE SWITCH (MODE SELECTOR)

Both- This is the “standard” delay and reverb mode

Reverse- This is reverse delay mode with “standard” reverb

Swell- This is the volume swell mode

Effect Mode Features

BOTH

  • Both delay and reverb in standard forward mode
  • Reverb is fully stereo and follows delay in the signal path
  • All controls work as displayed
  • When using tap tempo to set the delay time, the repeats are cleared once new time is tapped in.
  • Hold Tap switch down to send delay into infinite repeats. On shorter Time settings, they will quickly go into oscillation and on longer Time settings, they will slowly build.

REVERSE

  • Reverse delay, normal reverb.
  • Ratio is always in 1/1 position no matter where the ratio switch is set.

    Pro Tip: The other ratios will still work for standard delay, if you set the ratio for anything other than 1/1 when you are in Reverse mode,  you will get really cool rhythmic patterns when using the Tap switch or expression pedal to switch between reverse and “normal” modes.
     
  • Hold down the Tap switch to temporarily send the delay back to forward mode and release the Tap switch to go back to Reverse.

    Pro Tip: Use the expression pedal in the “Toggle” position to go back and forth from reverse to standard. This allows you to still use the Tap switch to send the delay into self-oscillation.

SWELL

  • Adds an auto swell to the entire signal path, much like slowly turning up the volume control on your guitar.
  • Reverb Mix controls the length of the swell, swell length becomes longer as you turn the control clockwise.
  • Swells are triggered by the input, regardless of input strength. To get the most from this effect, adjust your playing to a more staccato style and mute the strings after every note or chord.
  • This mode sums both left and right inputs on both the wet and dry paths to mono.
  • Hold Tap switch down to send delay into infinite repeats. On shorter Time settings, they will quickly go into oscillation and on longer Time settings, they will slowly build.

Tails Mode

The Avalanche Run also has a “Tails” mode. Tails mode allows the wet signal to naturally fade out after the effect is switched off. It has 5 Tail length settings that are selected by the Ratio switch during power up.

How to engage Tails mode:

  • Unplug the power cable
  • Set the Ratio switch to the desired Tail length:Once you have selected the Tail length, hold down the Activate switch and plug in the power. The Activate LED will light up Green after 2 seconds then release the Activate switch and you’ll be in your desired Tails mode.
    • 1/4- True Bypass (See “Return to True Bypass” below)
    • 1/3- Short Tails
    • 1/2-  Medium Tails
    • 2/3- Long Tails
    • 3/4- User Defined- Tail length is determined by where the repeat control is set. Tails can go into oscillation by holding the Tap switch down or stopped by double clicking the Tap switch.
    • 1/1- “Sound on Sound”- Tail length goes into infinite repeats once the effect is switched off. Tails can go into oscillation by holding the Tap switch down or stopped by double clicking the Tap switch.
  • The signal is in buffered bypass mode when the LED is green.
  • The ratio switch will go back to selecting your desired Ratio after this process is complete.

  Return to True Bypass mode

  • Unplug the power cable
  • Set the Ratio switch to 1/4
  • Hold Activate switch and plug in the power. The Activate LED will light up Red after 2 seconds and you’ll be back in True Bypass mode.

Jacks & Signal Path

The audio jacks are located on the north side of the pedal, along with the 9v 425ma power jack.

  • The Avalanche Run has a stereo analog dry path, a dual mono delay path and a stereo reverb.
  • To run mono;  use the left input and output only.
  • To run stereo; through use both left and right inputs and outputs.
  • To run mono in and stereo out; use the left input and both left and right outputs.

Cool Trick: Plugging into the right input and using the left and right outputs will give you an all-wet left channel and a standard mixed right channel while the effect is engaged. You can create dramatic stereo effects by keeping the Mix set low and turning up the amplifier source connected to the left output. The left output will not pass dry signal when the effect is turned off in true bypass mode but trails mode it will still produce the effected signal as long as it is set to decay.

The expression jack is located on the west side of the pedal. It is a TRS jack with the tip acting as the wiper.

  • We recommend using a Moog expression pedal with the output adjustment knob all the way up.
  • We cannot guarantee any other expression pedal to work with the Avalanche Run.

Power Requirements

  • 425mA current draw
  • Please use the included 9V center negative 1 Amp DC power supply for best results

Our Mission

Our team of musicians fuses the spirit of the local guitar shop with the convenience of the web by creating a reliable and worry-free buying experience.

At Music Store Live, our goal is to revolutionize the way gear is bought online. It’s not just about videos and know how; it’s about the person on the other end of the line. Whether you are in Tokyo or Toledo, we invite you to experience the reality of a living online music store and help us shape the best buying experience possible. As you'll see in the video below, we're musicians just like you. We strive to offer the best gear, the best online experience, and the best personalized service in the industry. We invite you to get to know our team, and we would love the opportunity to get to know you too!

Free Shipping - Free Return Shipping - 30 Day Returns

At MusicStoreLive.com we are proud to offer free return shipping and a 30-day return policy in the 48 contiguous states on all new* items over $30. It's all part of our mission to bring the guitar shop to your living room. This policy allows you to get your gear hassle-free and try it with your own rig to be sure that it truly fits with your playing style and sound. If it doesn't work the way you had hoped we'll send you a prepaid return label and work up an exchange or issue you a refund once we get the item back in the same condition it was purchased. It's that simple.

Please allow 2-4 business days from the receiving date for returns to be processed.
  • Your order must ship to the billing address associated with your credit card, PayPal, or other method of payment (unless an alternate shipping address has been approved by an MSL Gear Specialist).
  • If you want the shipment to be held at a shipping company hub it is your responsibility to make those arrangements directly with the shipping company.
  • An indirect signature will be required upon delivery for all transactions over $250. If you would like to require a signature on a transaction of less than $250, please request it when you place your order.
  • We do not insure packages valued under $3,000. If you would like to add insurance for delivery or return please request it when requesting your order or initiating your return.
  • All returns are subject to a Tech Check upon arrival. Any instrument that is returned with damage, wear and tear (including pick marks), missing or replaced parts, missing protective or packing materials are not eligible for a full refund.
  • *Used / Open Box/ Vintage / Clearance items carry our same return policy, except with a 3­ day return window.
  • Orders shipped within California will be subject to 7.25% state sales tax.

In most cases we ship same day if your order is placed by 12 p.m. EST Monday thru Friday!

Return Policy Details
Is your instrument just not doing it for you? We understand and we absolutely want you to be thrilled with any gear that you buy from MusicStoreLive.com. If you're not happy with your order, you can return it to us at no charge within 30 days of delivery.

  • Customers outside the continental USA must pay their own return shipping and are responsible for all applicable taxes and fees.
  • The return policy does not apply to custom orders or modifications (pickup installs, etc)
  • Contact MSL at info@musicstorelive.com or (866) 256-5725 to begin the return process. You can request a refund, store credit, or exchange.
  • We'll provide you a return label via email.
  • Ship the item back to us in its original packaging using the provided return label.
  • Customer is responsible for returning the item to Music Store Live in its original condition.
  • A refund or exchange will be issued within 3 business days from our receipt of the returned item.
  • All returns will go through a technical inspection and are subject to a restocking fee if the item is not returned in its original condition. Restocking fee to be determined by MSL.

Layaways & Financing

Layaways

  • Deposit a non-refundable minimum of 10% down of the purchase price on anything in stock
  • Contact MSL at info@musicstorelive.com or (866) 256-5725 to place your initial deposit.
  • Pay it off at your convenience within 30 days.
  • $100 layaway fee for each additional month over the initial 30 days (on most items).

Financing

Connect with us

The Music Store Live Experience

  • Our Team
  • Our Team
  • Our Team
  • T-Shirts and Hoodies

PaymentS

  • Pay with PayPal, Pay
  • Pick it up Financing Pay with easy monthly payments

Fender®, Gretsch®, Guild®, EVH®, Stratocaster®, Telecaster®, Jazzmaster®, Jaguar®, Precision Bass®, Jazz Bass®, and Mustang® are all registered trademarks of the Fender Musical Instruments Corporation.  These instruments are sold and shipped only to the United States and its' territories.

© 2017 MSL. All Rights Reserved.