Wampler Mini Ego Compressor Guitar Effects Pedal

What does a compressor do? A compressor adds an element of control to your playing level – it will bring the quieter parts up and the louder parts down. While an ordinary compressor pedal can give you an element of control, a great compressor will give you the “feel” that other average compressors lack. If you’ve played a great tube amp when it’s being pushed hard, you’ll know what a great natural compressor feels like.

Based on the incredible success of the original Ego but featuring switches for tone (dark and bright) and attack (slow and fast) you can tweak your tone to a standard of a pedal twice its size. By keeping the clean blend of the original, your original signal to be blended in so you can get all the benefits of a great compressor (picking up the notes that aren’t as strong and increasing sustain) but you have the option to remove the squash at the front by bringing the bypassed signal in. With this control, you can have full country squash or open studio level parallel compression. Basically, the Mini Ego gives you complete control of every aspect of your compression.

So, with a comprehensive array of controls and a core tone that is pure, you won’t find a compressor that works perfectly as an “always on” or as “an effect” that is more highly regarded than the Mini Ego from Wampler Pedals.

WAMPLER Peals Limited Warranty.

WAMPLER offers a five (5) year warranty to the original purchaser that this WAMPLER product will be free from defects in material and workmanship. A dated sales receipt will establish coverage under this warranty. This warranty does not cover service or parts to repair damage caused by accident, neglect, normal cosmetic wear, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures and service, repair or modifications to the product, which have not been authorized by WAMPLER. If this product is defective in materials or workmanship as warranted above, your sole remedy shall be repair replacement as provided below.

RETURN PROCEDURES.

 In the unlikely event that a defect should occur, follow the procedure outlined below. Defective products must be shipped, together with a dated sales receipt, freight pre-paid and insured directly to WAMPLER SERVICE DETP – 3383 Gage Ave., Huntington Park, CA 90255, USA. A Return Authorization Number must be obtained from our Customer Service Department prior to shipping the product. Products must be shipped in their original packaging or its equivalent; in any case, the risk of loss or damage in transit is to be borne by the purchaser. The Returns Authorization Number must appear in large print directly below the shipping address. Always include a brief description of the defect, along with your correct return address and telephone number.

 When emailing to inquire about a returned product, always refer to the Return Authorization Number. If WAMPLER determines that the unit was defective in materials or workmanship at any time during the warranty period, WAMPLER has the option or repairing or replacing the product at no additional charge, except as set forth below. All replaced parts become a property of WAMPLER. Products replaced or repaired under this warranty will be returned via ground shipping within the United States freight prepaid. WAMPLER is not responsible for costs associated with expedited shipping, either to WAMPLER or the return of the product to the customer.

 INCIDENTAL OR CONSEQUENTIAL DAMAGE.

In no event is WAMPLER liable for any incident or consequential damages arising out of the use or inability of the possibility of such damages, or any other claim by any other party. Some states do not allow the seclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.

FOR YOUR PROTECTION. 

Please complete the online warranty registration within (10) ten days of the date of purchase so that we may contact you directly in the event of a safety notification issued in accordance with the 1972 Consumer Product Safety Act.

 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

 This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantees that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s warranty to operate the equipment.