Roland System-1 Plug-out Synthesizer with Sustain Pedal and Headphones
This product has been discontinued.
Roland System-1 Plug-out Synthesizer 25-key Synthesizer Keyboard
- Maximum Polyphony
- 4 voice
- LFO
- Waveform (SINE, TRIANGLE, SAW, SQUARE, Sample&Hold, Random)
Fade Time
Rate
Pitch Modulation Level
Filter Modulation Level
Amplifier Modulation Level - Oscillator
- Wave Form (SAW, SQUARE, TRIANGLE, SAW 2, SQUARE 2, TRIANGLE 2, NOISE SAW, LOGIC OPERATION, FM, FM+SYNC, VOWEL, CB)
Sub Oscillator (-1 Oct, -2 Oct)
Noise Oscillator (White Noise, Pink Noise)
Range (64, 32, 16, 8, 4, 2)
Color
Fine Tune
Coarse Tune
Oscillator Sync
Cross Modulator
Ring Modulator
Modulation Source (MANUAL, LFO, P. ENV, F. ENV, A. ENV, SUB OSC)
Envelope Attack Time
Envelope Decay Time
Envelope Depth - Mixer
- OSC 1
OSC 2
SUB OSC
NOISE - Filter
- LPF Type (-12 dB, -24 dB)
LPF Cutoff
Resonance
HPF Cutoff
Envelope Attack Time
Envelope Decay Time
Envelope Sustain Level
Envelope Release Time
Envelope Depth
Key Follow - Amplifier
- Envelope Attack Time
Envelope Decay Time
Envelope Sustain Level
Envelope Release Time - Effect
- Tone
Crusher
Reverb
Delay
Delay Time - Arpeggio
- Arpeggio Switch
Arpeggio Type (1 Oct Up, 1 Oct U+D, 1 Oct Down, 2 Oct Down, 2 Oct U+D, 2 Oct Up)
Arpeggio Step (1/4, 1/8, 1/16, 1/4T, 1/8T, 1/16T) - Scatter
- Type (1–10)
Depth (1–10) - Tune
- 430–450 Hz
- Controller
- Volume
Portamento
Legato switch
Bend Range
Tempo Sync switch
LFO Key Trigger switch
Key Assign Mode switch
Key Hold switch
Octave (-3, -2, -1, 0, 1, 2, 3) - Sampling Frequency
- 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
- Patches per bank
- 64 patches
*User can make new user banks. - Plug-In Formats
- VSTi 2.4 (32 bits, 64 bits) * Windows only
VSTi 3.6 (32 bits, 64 bits)
AU - System Requirements
- Mac OS
- Operating System:
Mac OS X 10.8.5 or later
Host Application:
VST instruments (VSTi) version: VST 3.6 compatible
Audio Units (AU) version: V2 Audio Units compatible
CPU:
Intel® Core™ 2 Duo or better
RAM:
4 GB or more
Hard Disk:
100 MB or more
Display resolution and Colors:
1280 x 800 dots or higher, 16.7 million colors or more
Other:
You'll need Internet connectivity to activate this software.
You'll need installation SYSTEM-1 driver to connect this software to the SYSTEM-1. - Windows
- Operating System:
Microsoft® Windows® 7 SP1
Microsoft® Windows® 8/8.1
* This does not work with the Windows® RT.
* This does not work with the Windows® Phone.
* This does not work on the virtual machines such as Hyper-V, Virtual PC, or Boot Camp.
Host Application:
VST instruments (VSTi) version: VST 2.4/3.6 compatible
CPU:
Intel® Core™ 2 Duo or better
RAM:
2 GB or more
Hard Disk:
100 MB or more
Display resolution and Colors:
1280 x 800 dots or higher, 24 bits Full Color or more
Other:
You'll need Internet connectivity to activate this software.
You'll need Adobe Reader (available free of charge) in order to read the online help.
You'll need installation SYSTEM-1 driver to connect this software to the SYSTEM-1. - * Although Roland has tested numerous configurations, and has determined that on average, a computer system similar to that described above will permit normal operation of the SYSTEM-1 Software Synthesizer, Roland cannot guarantee that a given computer can be used satisfactorily with the SYSTEM-1 Software Synthesizer based solely on the fact that it meets the above requirements. This is because there are too many other variables that may influence the processing environment, including differences in motherboard design and the particular combination of other devices involved.
Samson HP10 Playback Monitoring Headphones
-
Headphone Type: Closed
-
Driver Size: 40mm
-
Fit Style: Circumaural
-
Frequency Response: 20Hz-20kHz
-
Impedance: 32 ohms
-
Plug Type: 1/8-inch to 1/4-inch adapter
-
Cable Type: Straight
-
Cord Length: Approximately 3 meters
-
Weight: 0.7 pounds
Manufacturer's Description
Roland System-1 Plug-out Synthesizer 25-key Synthesizer Keyboard
Get all the sonic power and versatility of the acclaimed SYSTEM-1 synthesizer in a VST and AU compatible plugin. Like the SYSTEM-1 hardware, this software version breaks new ground with remarkable flexibility and a vast palette of stunning sounds. It has the bold, unmistakable character associated with Roland synthesizers for over four decades. For SYSTEM-1 hardware owners, the software provides advanced editor/librarian functions and total DAW integration. For in-the-box producers, it delivers the mighty sound of the SYSTEM-1 without the need for hardware.
Future Classic
Since its release, the SYSTEM-1 has received worldwide acclaim for its ability to dish out an astonishing array of synth tones, from vintage to modern. Spend a little time with its intuitive controls and you’ll quickly appreciate the ability to dial-up all manner of instantly usable sounds that sit perfectly in a mix. Thumping basses, glistening arps, warm pads, plucked synths, lo-fi effects. We’re talking desert island synth.
At its heart is our Analog Circuit Behavior (ACB) technology, which we use to carefully analyze the structure and behavior of analog circuits and then faithfully recreate them down to the finest details. This technology fills the SYSTEM-1, creating a fusion of beautifully classic and utterly modern synth tones that live and breathe.
Advanced Arpeggiator
The SYSTEM-1’s advanced arpeggiator with its Scatter capability gives it unprecedented versatility and playability. Six arpeggio types with six step settings combine with variable Scatter type and depth to create a seemingly infinite selection of patterns. Smoothly controllable, you can even arpeggiate synth parameters like cutoff and resonance, in addition to notes.
Hardware. Meet Software.
The SYSTEM-1 Software Synthesizer is a must-have if you own the SYSTEM-1 or SYSTEM-1m hardware. Seamless, bi-directional communication between the hardware and software provides complete editor/librarian functionality and an automatic, one-to-one hardware control interface that just works.
Samson HP10 Playback Monitoring Headphones
Samson's HP10 Playback Headphones offer great sound on-the-go or in your home studio. The HP10s feature a lightweight, closed-back design with an adjustable headband that will provide a comfortable listening experience for any user. With 40mm full-range drivers, a frequency response ranging from 20Hz to 20kHz and an impedance level of 32 ohms, these headphones are strong performers in a variety of applications. They are perfect for use with your keyboard, guitar and other quiet music practice. You can also use them with your MP3 or media player. The HP10 Playback Headphones are an ideal accessory to include as part of any bundling package for compatible products.
Keyboard Sustain Pedal
A full size piano-style pedal that is perfect when you need a sturdy and responsive control over sustain! This high-quality pedal features a polarity switch making it compatible with virtually any keyboard. The heavy-duty spring allows for better control and durability. Compatible with any electronic keyboard with a ¼” sustain jack, including Yamaha, Casio, Korg, Roland and MORE!
Features
-
Full size piano-style pedal
-
Polarity switch for universal compatibility
-
Chrome foot pedal comes with a removable scratch resistant cover, which doubles as a non-slip foot grip
-
Built-in 6‘ cord with ¼” input jack