Audio Technica AT4033CL Large Diaphragm Condenser Microphone
-
ELEMENT Fixed-charge back plate, permanently polarized condenser
-
POLAR PATTERN Cardioid
-
FREQUENCY RESPONSE 30-20,000 Hz
-
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
-
OPEN CIRCUIT SENSITIVITY -32 dB (25.1 mV) re 1V at 1 Pa
-
IMPEDANCE 100 ohms
-
MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D.;
-
155 dB SPL, with 10 dB pad (nominal)
-
NOISE 17 dB SPL
-
DYNAMIC RANGE (typical) 128 dB, 1 kHz at Max SPL
-
SIGNAL-TO-NOISE RATIO 77 dB, 1 kHz at 1 Pa
-
PHANTOM POWER REQUIREMENTS 48V DC, 3.2 mA typical
-
SWITCHES Flat, roll-off;
-
10 dB pad (nominal)
-
WEIGHT 13.4 oz (380 g)
-
DIMENSIONS 6.69" (170.0 mm) long,
-
2.10" (53.4 mm) maximum body diameter
-
OUTPUT CONNECTOR Integral 3-pin XLRM-type
-
ACCESSORIES FURNISHED AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
-
AUDIO-TECHNICA CASE STYLE R1
Manufacturer's Description
The Audio-Technica AT4033CL Large Diaphragm Condenser Mic uses transformerless circuitry to virtually eliminate low-frequency distortion and enhance the capture of high-speed transients. An 80Hz high-pass filter easily switches between flat frequency response and a low-end roll-off that diminishes ambient noise and popping with closely-miked vocals. Requires 48V phantom power. Includes AT8449 shockmount.
Features
- Cardioid pattern
- Frequency response 30-20,000Hz
- Low frequency roll-off: 80Hz, 12dB/octave
- Maximum input sound level: 145dB SPL, 1kHz @1% distortion; 155dB SPL, with 10dB pad (nominal)
- Noise 17dB SPL
- Dynamic range (typical) 128dB, 1kHz at max SPL