Audio-Technica AT-M350 Cardioid Condenser Clip-On Instrument Microphone
-
ELEMENT: Fixed-charge back plate permanently polarized condenser
-
POLAR PATTERN: Cardioid
-
FREQUENCY RESPONSE: 40-20,000 Hz
-
LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
-
OPEN CIRCUIT SENSITIVITY: —49 dB (3.5 mV) re 1V at 1 Pa
-
IMPEDANCE: 50 ohms
-
MAXIMUM INPUT SOUND LEVEL: 149 dB SPL, 1 kHz at 1% T.H.D.
-
DYNAMIC RANGE (TYPICAL) : 122 dB, 1 kHz at Max SPL
-
SIGNAL-TO-NOISE RATIO: 67 dB, 1 kHz at 1 Pa
-
PHANTOM POWER REQUIREMENTS: 11-52V DC, 3.5 mA typical
-
SWITCH: Flat, roll-off
-
WEIGHT (MICROPHONE): 14.5 g (0.5 oz)
-
WEIGHT (POWER MODULE): 81.2 g (2.9 oz)
-
DIMENSIONS (MICROPHONE): 37.8 mm (1.49") long, 12.2 mm (0.48") diameter
-
DIMENSIONS (POWER MODULE): 92.9 mm (3.66") long,18.9 mm (0.74") diameter
-
OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type
-
CABLE: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with TA3F-type connector
-
ACCESSORIES FURNISHED: AT8542 power module; AT8418 UniMount microphone instrument mount; AT8468 violin mount; soft protective pouch
-
AUDIO-TECHNICA CASE STYLE: M36
Manufacturer's Description
Supplied with Audio-Technica’s versatile UniMount® clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, upright bass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter on the in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback.
Features
-
Low-profile design for minimum visibility
-
UniMount® clip permits accurate positioning, provides shock resistance and protects element
-
Unique violin mount permits unobtrusive placement of microphone between the instrument’s bridge and tailpiece
-
Crisp, clear, well-balanced response, even at high SPLs
-
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
-
Interchangeable elements available for hypercardioid and omnidirectional polar patterns
-
Corrosion-resistant contacts from gold-plated XLRM-type connector
-
Rugged, all-metal design and construction for years of trouble-free use