Blackstar HT Series HT-1RH Tube Guitar Amp Head with Reverb
Manufacturer's Description
The HT-1RH is the perfect amp, packing all the great tone and innovative features of the award-winning HT-5 valve amp into a 1 Watt format. The patented ISF (Infinite Shape Feature) circuit gives you infinite adjustment over the characteristics of the tone control network and takes you from the USA to the UK and anywhere in between. Add a fully specified speaker emulated output, MP3/ Line Input and you have everything you need for recording or practicing.
1 watt, 1xECC83, 1xECC82
The HT-1RH is the perfect studio and practice amp, packing all the great tone and innovative features of the award-winning HT-5 valve amp into a 1 Watt format. In making the HT-1 ideally suited to home and studio use, the aim was to develop a valve amp which sounded full and toneful even at the lowest volume level.
ISF Control
Working with the Bass, Middle and Treble controls, the ISF control gives you access to infinite new sound possibilities on the HT-1. This fully interactive control allows you to infinitely adjust the response of the tone control network between any of the traditional voicings. In this way you can design your own sound and truly find the sound in your head.
Two Channels
The HT-1RH has two channels available for selection, a Clean channel and an Overdrive channel. Using the Gain control while on the Clean channel you are able to deliver everything from a clean sound through to a crunch tone. Alternatively you can select the Overdrive channel and again using the Gain control, change from a clean sound on the edge of breakup right through to a distorted lead tone.
Speaker Emulated Output
The HT-1RH has a fully specified speaker emulated output which further enhances the studio credentials and allows any guitarist to get amazing valve tone straight to tape or disk, or through headphones.
Unique Push-Pull power amp design
The HT-1RH power amplifier is a low powered push-pull design which produces the crunch and break-up characteristics of a traditional 100W output stage but at a much lower volume. This is achieved by the use of an ECC82 dual triode in push-pull configuration producing 1 Watt output, which is rich in valve harmonics and compression, sounding full and toneful even at the lowest volume level.
Stereo MP3 / Line Input
A stereo MP3 / Line Input has been added to the HT-1RH allowing the user to play a backing track or similar, through the amp while practising / recording.
External Speaker Output
An 8Ω speaker output which allows you to run the amp into an external speaker cabinet of your choice, making the HT-1RH a very practical choice.
Stereo Reverb
The HT-1RH's Reverb control sets the overall level of the reverb effect. With the control fully counter clockwise there will be no reverb. Turning the control clockwise will increase the amount of reverb.
Features
Innovative 1 Watt valve head
1xECC83 and 1xECC82
Unique push-pull power amp design
Based on award winning HT-5
Two channels
Patented Infinite Shape Feature (ISF)
Perfect for studio or practice
Speaker emulated output
Stereo MP3 / Line input
External speaker output
Stereo Reverb