Skip to content
SKU AT-M2

Audio-Technica M2M In-Ear Wireless Monitor System

This product has been discontinued.

We have discontinued this product permanently. Please find alternative products from below section.

Manufacturer's Description

The M2 Wireless In-Ear Monitor System is designed to make professional in-ear monitoring features accessible for performers who want to be free from the problems associated with floor wedges. The stereo monitor system offers Personal Mix Control, which gives each musician volume and mix control of two independent signals on stage, via easy-to-use controls on the M2R stereo body-pack receiver. The wireless UHF M2T Stereo Transmitter provides a choice of 100 selectable frequencies and is equipped with two XLR/¼” combo input connectors into which users can connect line-level inputs. While up to 10 complete M2 systems may be used on stage simultaneously, any number of M2R stereo receivers may be used on the same frequency with a single M2T stereo transmitter. These rugged systems are built to stand up to the inevitable bumps of life on the road, delivering clear, natural sound for touring and installed-sound uses.

Features

  • EP3 Headphones

  • M2T Stereo Transmitter

  • M2R Stereo Receiver

  • High-fidelity sound

  • Can hear yourself better at lower volumes

  • Band M operates on frequencies between 614.000 to 647.000Mhz

  • Band L operates on frequencies between 575.000 to 608.000Mhz 100 selectable UHF channels

  • Up to 10 simultaneous systems per frequency band

  • 3.5mm line-in jack connects to ambient microphone, click track, and more

  • LED indicators provide easy-to-read level monitoring

  • XLR loop output (true pass-through) connects to signal mixing console, additional IEM systems or recording device with no signal degradation

  • Adjustable squelch eliminates annoying static

  • Pilot tone protects against RF interference when the transmitter is turned off

  • Limiter (defeatable) helps protect your hearing from sudden peaks

  • Portable system is quick to load and set up

  • Reduces on-stage audio clutter for better overall mix and less feedback

  • Use any number of M2R Stereo Receivers (with Personal Mix Control) on the same frequency

  • Dynamic drivers offer full frequency response and excellent isolation