Audient ID4 High Performance USB Audio Interface with Mogami Microphone Cable
This product has been discontinued.
Audient ID4 High Performance USB Audio Interface
MICROPHONE PREAMPLIFIER:
(measurement includes ADC signal path)
MIC GAIN: | 0 to 66 dB (inc. +10 dB software boost) |
LINE GAIN: | -10 to 56 dB (-10dB hardwired line pad) |
PHANTOM POWER: | 48V ±4V @ 10mA/Channel (12VDC only)* |
MIC EIN: | <-126.0 dBu |
CMRR: | >75 dB @ 1kHz |
MAXIMUM INPUT LEVEL: | +12 dBu (0 dBFS digital Maximum) |
INPUT IMPEDANCE (Mic): | 2.8 kΩ Balanced |
INPUT IMPEDANCE (Line): | >8kΩ Balanced |
FREQUENCY RESPONSE: | ±0.1 dB 20Hz to 22kHz @ min. gain ±1.0 dB 20Hz to 22kHz @ max. gain |
CROSSTALK: | <-91 dBu |
THD+N @ 0dBu (1kHz): | 0.0015% (-96.5dBu) |
SNR: | 96 dB un-weighted, 99 dB A-weighted |
XLR Combi Female | Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield) |
1/4" TRS Jack | Tip (Hot), Ring (Cold) & Sleeve (Shield) |
D.I (Channel 1):
D.I GAIN: | -5 to 45 dB (inc. +10 dB software boost) |
MAXIMUM INPUT LEVEL: | +8 dBu (0.6% THD typical) |
INPUT IMPEDANCE: | >500kΩ Unbalanced |
FREQUENCY RESPONSE: | ±0.1 dB 20Hz to 22kHz |
THD+N @ 0dBu (1kHz): | <0.1% all musical 2nd and 3rd harmonics
Typically 0.05% at 0dBu |
SNR: | 87 dB un-weighted, 90dB A-weighted |
1/4” JACK: | TIP (Hot) & SLEEVE (Shield) |
ANALOGUE TO DIGITAL CONVERTER (ADC 1 & 2):
(measured sans microphone preamplifier under AES-17)
MAXIMUM INPUT LEVEL: | +12 dBu (0 dBFS digital maximum) |
DIGITAL REFERENCE LEVEL: | +12 dBu = 0 dBFS |
FREQUENCY RESPONSE: | ±0.1 dB 10Hz to Fs/2 (flat to nyquist) |
CROSSTALK: | -100 dBu @ 1kHz & 10kHz |
THD+N @ -1dBFS (1kHz): | <0.001% (-100 dB) |
THD+N @ -6dBFS (1kHz): | <0.0011% (-99.1 dB) |
DYNAMIC RANGE: | 112 dB un-weighted 114 dB A-weighted |
DIGITAL TO ANALOGUE CONVERTER (DAC 1&2):
(measured under AES-17 at line outputs 1&2)
MAXIMUM OUTPUT LEVEL: | +12 dBu (0 dBFS digital maximum) |
DIGITAL REFERENCE LEVEL: | +12 dBu = 0 dBFS |
OUTPUT IMPEDANCE | <100Ω |
FREQUENCY RESPONSE: | ±0.1 dB 10Hz to Fs/2 (flat to nyquist) |
CROSSTALK: | <-104 dBu @ 1kHz & 10kHz |
THD+N @ -1dBFS (1kHz): | <0.0015% (-96.5 dB) |
DYNAMIC RANGE: | 112 dB un-weighted 115 dB A-weighted |
1/4" TRS Jack | Tip (Hot), Ring (Cold) & Sleeve (Shield) |
DUAL HEADPHONE OUTPUT:
MAXIMUM OUTPUT LEVEL: | +12 dBu (0dBFS digital maximum) |
DIGITAL REFERENCE LEVEL: | +12 dBu = 0 dBFS |
VOLTAGE GAIN: | +6 dB (optimised for loudness) |
OUTPUT IMPEDANCE: | <30 Ω Unbalanced |
FREQUENCY RESPONSE: | ±1.0 dB 10Hz to Fs/2 (load dependant) |
CROSSTALK: | -98 dBu @ 1kHz & 10kHz |
THD+N @ -1dBFS (1kHz): | <0.0012% (-98.4 dB) |
DYNAMIC RANGE: | 106 dB un-weighted 108 dB A-weighted |
MAX LEVEL INTO 30ohms: | +3 dBu, 0.008% THD+N, Power: 80mW |
MAX LEVEL INTO 60ohms: | +6 dBu, 0.005% THD+N, Power: 80mW |
MAX LEVEL INTO 600ohms: | +12 dBu, 0.0025% THD+N, Power: 31mW |
1/4” TRS JACK: | TIP (Left), RING (Right) & SLEEVE (Shield) |
1/8” MINI JACK: | TIP (Left), RING (Right) & SLEEVE (Shield) |
USB 2.0 HIGH SPEED:
BUS POWER: | 500mA @5V System Limit 420mA @5V Maximum (No 48V) |
No. of INPUT CHANNELS: | 2 (2 Analogue) |
No. of OUTPUT CHANNELS: | 2 (2 Analogue) |
DSP MIXER LATENCY: | ROUND TRIP (in-to-out)
44.1kHz 1.583ms |
COMPATIBILITY:
iD4 supports the following operating systems:
- macOS 10.7.5 and later
- Windows 7 and later
- iOS 6 and later
* To use iD4 with an iOS device a camera adapter kit and a powered USB 2.0 hub is required.
POWER SUPPLY:
USB2.0 Powered (2.5 Watts Maximum)*
* iD4 features our class leading converters and class-A mic pre. We've optimised all circuitry so that we can supply true 48v phantom power to a single Audient mic pre without compromise. Your microphones will thank you when they get enough voltage.
Mogami Gold Studio XLR Male to XLR Female Microphone Cable - 15 ft
- Cable Type: XLR microphone cable
- Length: 15' (4.5m)
- Gauge: 4 x 24 AWG
- Shielding: 100% spiral shield
- Connector 1: 3-Pin XLR male
- Connector 2: 3-Pin XLR female
Manufacturer's Description
Audient ID4 High Performance USB Audio Interface
iD4 delivers the audio performance of a large format console in a portable desktop package. Providing one renowned Audient console mic pre, class-leading converter technology, two headphone inputs, console style monitor control, JFET D.I and our virtual scroll wheel technology 'ScrollControl', iD4 is a professional but affordable solution for your home studio or for when you’re on the road.
WORLD CLASS MIC PRES
The professional sound you deserve
We are the only company that use the same Class-A mic pre design throughout our entire product range, whether you’re in the studio with an Audient console or on the road with iD4, you’re always guaranteed the same world class Audient sound.
PRISTINE CONVERTER TECHNOLOGY
Brilliance on the inside enables brilliance on the outside
iD4 provides you with high performance AD-DA converters. Quality in the analogue stages of design comes from years of experience as analogue console designers, and when coupled with outstanding converter technology it enables you to hear audio as it’s supposed to sound. The importance of converters should never be underestimated. Experience audio the Audient way.
THE REVOLUTIONARY ‘SCROLLCONTROL’
Simply scroll to control
With a touch of a button iD4’s volume encoder becomes a virtual scroll wheel, enabling you to adjust DAW hosts, plug-in parameters and even scroll through your iTunes library - just like you’re adjusting a piece of hardware. Wherever your mouse pointer hovers, the iD knob can scroll to control! And when your not using ScrollControl, pressing iD4’s volume encoder activates DIM, enabling you to quickly reduce the playback volume.
PLUG AND PLAY
Plug in and be inspired
iD4 has a harmonically rich JFET D.I input. Designed to replicate the input stage of a classic valve amplifier, you can plug your guitar, bass, keyboard or drum machine straight in and start recording instantly. Get professional quality recordings from the start and take your track to the next level.
MONITOR PAN
Headphone mixes with Clarity
Recording an acoustic guitar and vocal? iD4’s Monitor Pan feature enables you to pan both the mic pre input and D.I input from left to right, making it easy for you to create a balanced headphone mix that suits you. Quickly plug in, set up a headphone mix and starting tracking instantly, perfect for singer songwriters & producers on the go!
MONITOR MIX
Record with confidence
iD4’s Monitor Mix feature lets you monitor a blend of both iD4’s inputs and your DAW playback, providing near zero latency monitoring while recording. Designed with creativity in mind, Monitor Mix allows you to quickly blend in your DAW playback and start recording along to your multitrack instantly, enabling you to focus on the music and lay down your track effortlessly.
DUAL HEADPHONE OUTPUTS
Write, collaborate and create
Featuring a dual headphone output, iD4 enables you to collaborate with your friends and other artists. Whether you’re recording a guitar and a vocal, or just listening to music together, iD4 lets you plug in two sets of headphones, making it the perfect tool for jamming with your friends and capturing creativity as it happens. The dual headphone output also has both a jack and mini jack output, so no more need to carry around a pesky headphone adaptor!
BUILT TO LAST
Quality deserves protection
iD4 has been designed to last, from its all-metal construction, hand finished aluminium knobs and high grade component selection, iD4 will stand up to countless late nights in the studio and days on the road.
Features
- 1 x Class-A Audient Console Mic Preamplifier
- 1 x Discrete JFET Instrument Input
- High Performance Converters
- iD ScrollControl Mode
- Zero Latency Monitoring with Monitor Mix & Pan
- Main Speaker Output
- Independent Class-AB Headphone Output (dual inputs)
- Monitor Control Functionality
- USB2.0 Bus Powered
- 24bit/96khz
- All-Metal Enclosure
- Windows, macOS and iOS compatible
Mogami Gold Studio XLR Male to XLR Female Microphone Cable - 15 ft
This Mogami Gold Studio XLR Microphone Cable is a high quality microphone cable for studio use utilizing Neglex Studio Quad #2534 cabling for better clarity and diminished noise and RF interference. This cable is terminated with black body 3-pin XLR connectors and gold contacts.
Neglex type Quad Cables have been developed for the highest quality recording applications where maximum definition of recorded sound is of critical importance. Special proprietary materials & construction methods make those state-of-the-art mic cables a must for direct to DISC and digital recording. Basic matters of flexibility, microphonics and shielding effect have been designed to meet international professional requirements.
- Neglex quad microphone cable helps alleviate RFI interference problems
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, reproductive, and developmental harm. For more information, visit www.p65warnings.ca.gov